基于绳系并联机器人支撑系统的SDM动导数试验可行性研究

详细给出了在低速风洞中,采用绳系并联机器人(WDPR)支撑模型,用强迫振荡法进行标准动态模型(SDM)动导数试验可行性的研究。试验中将杆式六分量应变天平内置入模型中以测量模型的气动力和气动力矩,建立了适用于绳系并联机器人支撑系统的模型运动控制子系统和数据采集子系统。采用绳拉力作为参考信号,对气动力矩信号与位姿信号进行数据的同步处理,解决了绳系并联机器人支撑系统应用于动导数试验时所测力矩信号与位姿信号之间的相位差确定问题,给出了WDPR支撑下模型动导数的计算方法。整个试验样机置于某开口式低速直流风洞中进行了俯仰、带偏航角的俯仰以及升沉的动导数试验,通过测量和计算得到各动导数。试验结果与参考文献相比较具有合理的一致性。研究结果表明,采用绳系并联机器人支撑模型进行动导数试验是可行的,至少对于SDM是这样的结果;使用一套绳系并联机器人支撑系统,可以完成多套硬式支撑系统才能完成的动导数试验,从而提高试验效率,降低试验成本。     

自主导航控制及惯性技术发展趋势

从协同化、体系化、一体化适应未来战争的信息化,跨域化、高速化、多用化适应未来战争的立体多维化,自主化、平台化、小型化适应未来战争的无人智能化3个方面概述了未来战略新常态下武器装备对自主导航控制的需求,进而对自主导航控制这一概念进行了简要概述.从精确打击入手,阐述了惯性技术对自主导航的重要性,提出惯性技术是自主导航控制的核心.最后,从惯性器件、惯性传感技术、惯性测试、新功能材料、新兴算法和软件技术等方面分析总结了惯性技术的发展趋势,并对我国惯性技术的发展提出了一些建议.     

一种基于实数域特征值分解的前后向平滑算法

为减小算法的运算量,对常规前后向空间平滑(FBSS)算法进行改进,提出了一种基于实数域特征值分解的前后向平滑(RDFBSS)算法。算法根据前后向平滑算法协方差矩阵的中心-厄米特对称特点,通过实值化变换,使FBSS算法的特征值分解从复数域转为实数域,大幅减少了算法的运算量,且不影响解相干和统计性能,提高了实用性。仿真结果证实了算法的有效性。     

The role of space related non-governmental organizations (NGOs) in capacity building

Non-governmental organizations (NGOs) play a unique role in international affairs, providing access to resources, expertise, and assistance to supplement State resources. Sometimes the diplomatic skills and unofficial access of NGOs to policymakers through Track Two diplomacy can move a previously stalled critical issue forward and assist policymakers from different countries to find common ground outside official channels. Because they work outside of official channels, they are not bound by State policy that may inhibit negotiations between States. Some also have a convening power that sometimes makes it possible for State representatives to meet discipline experts and each other for informal discussions on issues of mutual interest. Finally, NGOs can draw attention to issues that may be overlooked or avoided by State organizations.     

Shock protection of penetrator-based instrumentation via a sublimation approach

It is often necessary for space-borne instrumentation to cope with substantial levels of shock acceleration both in the initial launch phase, as well as during entry, descent and landing in the case of planetary exploration. Current plans for a new generation of penetrator-based space missions will subject the associated on-board instrumentation to far greater levels of shock, and ways must therefore be found to either ruggedize or else protect any sensitive components during the impact phase. In this paper, we present an innovative method of shock protection that is suited for use in a number of planetary environments, based upon the temporary encapsulation of said components within a waxy solid which may then be sublimated to return the instrument back to its normal operation. We have tested this method experimentally using micromachined silicon suspensions under applied shock loads of up to 15,000g, and found that these were able to survive without incurring damage. Furthermore, quality factor measurements undertaken on these suspensions indicate that their mechanical performance remains unaffected by the encapsulation and subsequent sublimation process.     

Mechanism parameters optimization of bionic frog jumping robot based on velocity directional manipulability measure

以速度方向可操作度作为跳跃性能的评价指标,从机构设计角度寻求改善仿蛙跳跃机器人跳跃性能的方法.在仿蛙跳跃机器人机构模型的基础上,建立了起跳阶段的运动学方程,得到机器人从关节空间到质心运动空间的速度映射关系,结合速度方向可操作度,利用优化算法对仿蛙跳跃机器人的机构参数进行优化,使机器人的跳跃性能达到最佳.优化结果表明,运用速度方向可操作度理论,对跳跃机器人机构参数进行优化研究是有效可行的.     

Hilbert空间中严格伪压缩映像的强收敛定理

给出了一种求解严格伪压缩非自身映像不动点集上变分不等式的迭代算法，并证明了其强收敛性。此结果推广了姚永红和T．H．Kim等的研究结果。最后，进一步将结论推广到求解有限个严格伪压缩非自身映像公共不动点集上的变分不等式。     

地基深空网发射机现状及未来发展

我国未来深空探测工程的发展对地基深空站发射机提出了更高的要求,不仅仅需要具有更高的输出功率,同时需要解决发射机高频谱纯度、高效率以及上行功率合成等。针对这些要求,对国内外地基深空网的组成和深空站高功率发射机现状以及未来发展趋势进行了研究,分析了速调管发射机与固态发射机在高功率输出条件下的优势,在此基础上,提出了我国深空站速调管发射机需要开展高功率连续波速调管、高功率低损耗滤波器、低纹波高功率开关电源、上行功率合成等关键技术,并为相应关键技术提供了理论建议及相应的解决方法,这可以为我国未来深空探测工程高功率发射机研制提供技术支撑,为后续地基深空网建设和发展提供参考。     

Beam-Park-Experiment-1/2000 with TIRA

A monostatic 24-h debris observation campaign (BPE-1/2000) has been prepared and conducted using FGAN's TIRA L-Band system. Based on experiences from previous Beam-park experiments a similar largely automated data processing is applied on an extended range window of 300–2000km. More than 1500 detections are encountered, 471 of them are verified as being real objects in Low-Earth-Orbit (LEO). PROOF's observation forecasting of catalogued objects is evaluated against the observed objects, and the difficulties obtaining radar cross-sections (RCSs) and object sizes from Beam-park experiments are discussed. Sidelobe detections are identified by using background information like two-line element (TLE) sets and/or catalogued RCSs.In comparison with previous experiments, the statistics show similarities confirming the concept of Beam-park experiments for space debris observations, despite the snapshot character of 24-h experiments. The comparison with MASTER/PROOF'99 and ORDEM2000 leads to a reasonable agreement between models and observations.     

多功能水冷壁排管爬壁机器人的研制

介绍了一种新研制开发的永磁吸附式双履带结构爬壁机器人，主要应用于火力发电站的大型排管锅炉中的水冷壁排管壁面的清扫和检测，并能够在检测到壁面厚度小于预置的极限值处发出报警信号、打标记，具有较高的推广应用价值。文中阐述了该机器人的结构、磁路的优化设计、自动测厚、打标系统和控制系统的研制。目前，该机器人已经经过多次现场试验。各项指标均已达到设计要求。